NHH Corporation

Tests	Conditions	Unit	T00017	T00028	T00032	T00011	T00025
Typical Application	/	/	Injection Moulding			Sheet Extrusion	Blow Moulding/ Blown Film
Specific Gravity	ASTM D792	/	1.48	1.29	1.39	1.59	1.27
Melt-Flow-Index	170-180℃/2.16 kg	g (10 min)^-1	4.8	12.9	5.6	26.5	3.4
Heat-Deflection-Temperature	ASTM D648	℃	80	54	82	54	86
Strength at Yield	ASTM D638	MN m^-2	29.6	45.7	33.7	38.3	34.0
Strength at Break	ASTM D638	MN m^-2	24.1	22.4	20.6	30.4	37.8
Elongation at Yield	ASTM D638	%	9	7	13	4	41
Elongation at Break	ASTM D638	%	30	48	30	8	509
Flexural Strength	ASTM D790	MN m^-2	58.9	69.5	57.5	54.0	34.6
Flexural Modulus	ASTM D790	MN m^-2	2220	2070	2170	2530	575
Izod Impact Strength	ASTM D256	J m^-1	420.7	483	470.2	298.8	590

All information on this Test Report based on the present state of our knowledge and does not guarantee of any kind whatsoever, whether implied or expressed since conditions of use are outside our control. Each customer should establish his own rules and take proper steps appropriate to the circumstances within his control and must take responsibility for observing existing laws and regulations. This Test Report does not form part of the conditions of sale of our products and is of a general nature.